With only a few DC and AC power supply units from REGATRON, a large number of tests can be performed to cover many different applications.
Do you have requirements in the field of DC and AC simulation? Do you combine DC simulation with grid simulation? Do your power or voltage / current ranges vary considerably?
REGATRON’s modular and technologically advanced DC and AC programmable power supplies are the ideal solution for demanding test requirements with changing applications and / or power ranges. For example, a combination of only a few of REGATRON’s DC and AC power supplies will cover the following range of applications:
TC.GSS unit(s) with optional software BatSim: Testing of battery supplied components and on-board electrical systems.
|Solar Array Simulation
TC.GSS or TopCon Quadro unit(s) with optional software SASControl: Testing of PV inverters and components.
TC.GSS unit(s) with optional software BatControl: Testing of all kind of electrical storage elements like batteries, capacitors, EDLCs (super caps).
TC.ACS unit(s) with optional software GridSim: Testing of all kind of grid-tied devices with complete regeneration of energy back to the grid.
|Fuel Cell Simulation
TC.GSS or TopCon Quadro unit(s) with optional software TFE: Testing of fuel-cell-powered components and on-board electrical systems.
|Smart Grid Simulation
By combining REGATRON DC power supplies with a REGATRON TC.ACS grid simulator, a complete model of a Smart Grid can be simulated.
|Fuel Cell Testing
TC.GSS or TC.GXS unit(s) with optional software TFE: Testing of fuel cells, with complete regeneration of energy back to the grid.
|Power Hardware-in-the-loop (PHIL)
The TC.ACS can also be operated in 'Amplifier Mode'. Computer generated data can be fed directly into the three amplifier inputs in order to generate a 3-phase output to a dedicated physical network.
Thanks to the exceptional functionality, not only usual laboratory tests are covered. The high degree of programmability allows for a wide range of more complex test applications, supported by dedicated application software from REGATRON.
In contrast to many other power supply manufacturers, REGATRON power supplies are especially designed for modular use and for changing requirements:
- Enhance your system power as required.
- REGATRON's power supply modules can be connected either in parallel, series or even in mixed-mode.
- Future challenges can always be met with REGATRON’s modular, expandable and fully parameter-controlled systems.
We would welcome the opportunity to talk to you about your requirements! Should you have any questions, or need additional information, please don’t hesitate to contact us:
REGATRON Performance. Precision. Quality.