Our range of test solutions has grown: REGATRON offers a versatile EMC Test System for IEC/EN 61000-4-X full compliance testing.

The comprehensive EMC Compliance Test System is cost-effective, as it consists of a basic configuration and an optional accessory device. Targeted full compliance testing up to 75 A continuous / 1000 A peak per phase! Learn more.

REGATRON's turnkey EMC test solution for standard tests according to IEC/EN 61000-4-X is based on the proven 4-quadrant 3-phase switch mode power source TC.ACS. The basic configuration includes a TC.ACS unit, the operating and service software ACSControl, and the additional EMC standards software package. In case of full compliance test requirements for the IEC/EN 61000-4-11 / 27 / 34 standards, the TC.ACS unit is combined with the TC.VSE accessory device. This allows for testing fast voltage slopes <5 μs and current peaks up to 1000 A. The ACSControl software features a separate test interface for each standard and provides waveform visualization, tracing and verification capabilities, and the automatic generation of a test report.

Covered Standards

• IEC/EN 61000-4-11:2004 Voltage dips, short interruptions, and voltage variations immunity tests up to 16 A per phase. Full compliance testing requires the optional hardware accessory TC.VSE.
• IEC/EN 61000-4-13:2002 + A1:2009 Harmonics and interharmonics immunity tests
• IEC/EN 61000-4-14:1999 + A1:2001 + A2:2009 Voltage fluctuation immunity test
• IEC/EN 61000-4-27:2000 + A1:2009 Unbalance, immunity test up to 16 A per phase. Full compliance testing requires the optional hardware accessory TC.VSE.
• IEC/EN 61000-4-28 + A1:2004 + A2:2009 Variation of power frequency, immunity test
• IEC/EN 61000-4-34:2005 + A1:2009 Voltage dips, short interruptions, and voltage variations immunity tests more than 16 A per phase. Full compliance testing requires the optional hardware accessory TC.VSE.

User-friendly EMC Test Software

The software uses intuitive graphical control elements and fully supports the above listed IEC 61000-4-X test standards. Each preprogrammed standard test consists of a certain number of sequences. These sequences consist of several blocks, which can be executed as a whole or as individually selected blocks. Testing made easy!

Sequence Tracing and Verification: After starting the test sequences, the state of progress is shown in the sequence tracer on the Graphical User Interface (GUI). Trigger signals can be generated for external measurements with power analyzers. This allows for catching every single step and thus each disturbance.

System Capability

The IEC/EN 61000-4-X standard test solution is available as single TC.ACS and optional TC.VSE units or, even more convenient, it comes fully integrated in an 19” cabinet with various options.

For more information please refer to the Product Description in the download section above right.

Great Additional User Benefit for the Ever Changing Test Requirements in Multipurpose Laboratories

The fast switching, regenerative TC.ACS power sources are very versatile 3-in-1 simulation & test devices with optional EMC compliance testing functionality. In addition to IEC/EN 61000-4-X testing, the TC.ACS power sources can be used as follows:

• Full 4-quadrant regenerative Grid Simulator for inverter and on-board charger (OBC) testing
• Self-contained RLC load mode for various load and Anti-Islanding tests
• Full 4-quadrant high-speed amplifier for versatile use in P-HIL applications
• EMC emission testing according IEC/EN 61000-3-X
• Power range from a few kVA scalable up to 2400+ kVA power systems
• Powerful operating and service software ACSControl for flexible use in the laboratory with comprehensive API and optional CAN interface for integration into automated test rigs

REGATRON: High power, small footprint, programmable test solutions.

Do you have any questions or need any further information? Are you interested in a quote? REGATRON's inside sales and application engineers will be happy to find the right solution for your requirement.

Send a Request for Information Send a Request for Quotation Subscribe to our Newsletter

 

Further Product Related Information

Immunity to conducted disturbances ∙ Repeatable and reliable test results ∙ Built-in report generator ∙ IEC Standard Revision Compliance Matrix ∙ Voltage unbalance ∙ Intuitive EMC test software ∙ Simulating various types of distorted voltage waveforms and transient conditions ∙ Analog interface for setpoints and actual values, operating states (I/O port) ∙ API offering .NET programming, e.g., by LabView, Python, or Matlab ∙ Ethernet ∙ USB ∙ Wide-band AC input (380...480 VAC) at 50/60 Hz ∙ Power factor 0.99

Pictures: REGATRON's turn-key EMC compliance test system

Examples of what REGATRON Power Supplies Are Used for

REGATRON's DC and AC power supplies are used worldwide for development and testing purposes and as industrial power supplies mainly in the following industries: e-mobility, renewable energy, smart grids, energy storage, photovoltaics, aviation industry, automotive industry, electrical industry, surface technology and railroad technology. Power supplies, application software and system integration – all made by REGATRON – result in turnkey power supply systems in the power range from 10 kW to 2400+ kW.

REGATRON's innovative product range includes AC/DC, AC/AC, DC/AC, and DC/DC power supplies that can be used universally or as application-specific solutions with reference to test and EMC standards.

Universal Power Supplies	Application Specific Test Solutions
Full 4-Quadrant Regenerative 3-Phase AC Sources Regenerative AC Electronic Loads (programmable RLC-Loads) Full 4-Quadrant Regenerative 1...3-Phase Power Amplifiers CV/CC Bidirectional Regenerative DC Power Supplies DC Sources Regenerative DC Electronic Loads	Grid Simulators, 3-Phase, 4-Wire Anti-Islanding Test Systems for Grid-tied Power Generator Equipment EMC Test Systems with Preprogrammed EMC Test Sequences Battery Testers Battery Simulators Solar Array (PV) Simulators Charger Testers Drivetrain Testers

 

REGATRON Performance. Precision. Quality.