How can I establish a parallel, series or matrix configuration of multiple TopCon devices?

The following steps must be performed:


Installation of CANCable and dummy plugs

  1. 1: X101 CAN TERM Interlock CTR4
  2. 2: X105 Interlock CTR4
  3. 3: CANCable(s)
  4. 4: X101 CAN Term or X101 CAN TERM Interlock CTR4


Addressing of the TopCon units





System configuration of the Master device in TopControl (Advanced user level required)


Setting unique HMI IDs

Each HMI needs a unique HMI ID.

HMI MENU HMI settings HMI ID 1,2,3,…,n ESC Save HMI settings