Our range of test solutions has grown: REGATRON offers a versatile EMC Test System for IEC/EN 61000-4-X full compliance testing.
The comprehensive EMC Compliance Test System is cost-effective, as it consists of a basic configuration and an optional accessory device. Targeted full compliance testing up to 75 A continuous / 1000 A peak per phase! Learn more.
REGATRON’s turnkey EMC test solution for standard tests according to IEC/EN 61000-4-X is based on the proven 4-quadrant 3-phase switch mode power source TC.ACS. The basic configuration includes a TC.ACS unit, the operating and service software ACSControl, and the additional EMC standards software package. In case of full compliance test requirements for the IEC/EN 61000-4-11 / 27 / 34 standards, the TC.ACS unit is combined with the TC.VSE accessory device. This allows for testing fast voltage slopes <5 μs and current peaks up to 1000 A. The ACSControl software features a separate test interface for each standard and provides waveform visualization, tracing and verification capabilities, and the automatic generation of a test report.
Covered Standards
- IEC/EN 61000-4-11:2004 Voltage dips, short interruptions, and voltage variations immunity tests up to 16 A per phase. Full compliance testing requires the optional hardware accessory TC.VSE.
- IEC/EN 61000-4-13:2002 + A1:2009 Harmonics and interharmonics immunity tests
- IEC/EN 61000-4-14:1999 + A1:2001 + A2:2009 Voltage fluctuation immunity test
- IEC/EN 61000-4-27:2000 + A1:2009 Unbalance, immunity test up to 16 A per phase. Full compliance testing requires the optional hardware accessory TC.VSE.
- IEC/EN 61000-4-28 + A1:2004 + A2:2009 Variation of power frequency, immunity test
- IEC/EN 61000-4-34:2005 + A1:2009 Voltage dips, short interruptions, and voltage variations immunity tests more than 16 A per phase. Full compliance testing requires the optional hardware accessory TC.VSE.
User-friendly EMC Test Software
The software uses intuitive graphical control elements and fully supports the above listed IEC 61000-4-X test standards. Each preprogrammed standard test consists of a certain number of sequences. These sequences consist of several blocks, which can be executed as a whole or as individually selected blocks. Testing made easy!
Sequence Tracing and Verification: After starting the test sequences, the state of progress is shown in the sequence tracer on the Graphical User Interface (GUI). Trigger signals can be generated for external measurements with power analyzers. This allows for catching every single step and thus each disturbance.
System Capability
The IEC/EN 61000-4-X standard test solution is available as single TC.ACS and optional TC.VSE units or, even more convenient, it comes fully integrated in an 19” cabinet with various options.
For more information please refer to the Product Description in the download section above right.
Great Additional User Benefit for the Ever Changing Test Requirements in Multipurpose Laboratories
The fast switching, regenerative TC.ACS power sources are very versatile 3-in-1 simulation & test devices with optional EMC compliance testing functionality. In addition to IEC/EN 61000-4-X testing, the TC.ACS power sources can be used as follows:
- Full 4-quadrant regenerative Grid Simulator for inverter and on-board charger (OBC) testing
- Self-contained RLC load mode for various load and Anti-Islanding tests
- Full 4-quadrant high-speed amplifier for versatile use in P-HIL applications
- EMC emission testing according IEC/EN 61000-3-X
- Power range from a few kVA scalable up to 2400+ kVA power systems
- Powerful operating and service software ACSControl for flexible use in the laboratory with comprehensive API and optional CAN interface for integration into automated test rigs
Have Questions or Looking to Tackle a Similar Challenge?
Reach out to our team — we’re happy to support you with technical expertise, detailed guidance, and solution-oriented consultation.
REGATRON Performance. Precision. Quality.