Product Overview
Options
Power- | Voltage- | Current-Range
Downloads

Options and Functions for the G5.DT Series

The HMI built into the front panel allows comprehensive and convenient operation of the power supply via touch display or the WebAPI (REST) interface. With the remote control unit (RCU) it is possible to control the device or system from a distant location in the same manner as with the HMI.

Order Code: HMI | RCU

G5 HMI Remote Control Unit – user interface option for REGATRON programmable power supplies

The EtherCAT slave interface (ECAT) supports configuration by ESI file and communicates in a 1 kHz cycle. It transmits the entire process data in the same cycle, i.e. commands, actual states, and actual values. Acyclic communication via mailbox for device configuration is also possible. 

Order Code: ECAT

SCPI, Standard Commands for Programmable Instruments, are ASCII s trings, which are sent to the device over TCP/IP using the LAN socket. They can perform set operations or query operations.

Order Code: SCPI

A DDU with 18, 27, 36, or 54 kW matched to the device output voltage, enables the safe discharge of any stored energy in the system in the event of an emergency stop, an error of the power supply, or after a DC-off command. The DDU is fully controlled and monitored by the connected G5.DT device and starts discharging after the shutdown of the test bench and stops five seconds later or when the maximum energy amount of the resistor is exceeded. The G5.DT device can be restarted as soon as the energy counter has reached the average power level of the resistor.

Technical characteristics of the G5.DDU:

  • Mounted in 19” / 3 U housing
  • Maximum discharge power reached at nominal device voltage
  • Operation with single devices or multi-device systems in parallel configuration
  • Logic of trigger events and discharge duration can be ordered upon request
  • Switch-on delay typically at 50 msec
  • Requires relay contact and digital input of I/O interface

The DDU products listed above are available along with Regatron’s turnkey cabinet solutions. For other discharge specifications, please contact Regatron to discuss your requirements.

Order Code: DDU

G5 DDU characteristics table – diagnostic and data unit specifications for REGATRON power supplies

Discharging of the AC filter (XCD), is mandatory when using the device with a plug connection. XCD ensures a discharge time of the AC filter less than 1 s as required by EN 62477-1

Order Code: XCD

Based on the 80 V models, also a 60 V SELV version is available.

order code example: G5.DT.9.60.338

The different protective covers are designed for integration into 19″ rack systems or for use as a tabletop device. The cover for cabinet integration provides protection against accidental contact, whereas the cover for the tabletop version requires touch-proof protection in accordance with standard EN 62477-1.

Order Code: PAC

G5 protection covers – safety accessories for REGATRON programmable power supplies

Front panel mounted air filter (AirFilter), recommended for use in dusty environments and with IP20 cabinets

Order Code: Airfilter

Liquid cooling of the G5 devices is available at system level. The Regatron solution allows to take the entire dissipated heat of the power supply out of the test bench and reuse it as process heat in the facility if possible.

G5 liquid cooling option – efficient thermal management for REGATRON programmable power supplies
REGATRON’s liquid-cooled system solutions up to IP54 with various power levels e.g. 54…162 kW (left) and 216…324 kW (right). The re-mote control unit RCU, indicator lights, emergency stop button, and main switch allow the user to operate the system on the enclosure's front door.
  • Mobile rack solutions on castors up to 162 kW
  • Stationary rack solutions up to 324 kW
  • IP54 protection for air or liquid-cooled systems
  • Third-party product integration and numerous safety options
  • Insulation monitoring: remote activation of the insulation measurement, actual insulation value, and warning/error status are provided by the CANmp interface or by optional display
  • Easy reconfiguration between parallel, series, and mixed operation
Rack integrated system solution G5 – modular REGATRON programmable power supply setup
REGATRON’s rack-integrated turn-key system solutions for various power levels e.g. 72 kW (left) and 162 kW (right). Various types of AC/DC connectors and cables allow for comfortable handling.
Contact REGATRON – discover programmable power supplies and global support services

Benötigen Sie die richtige Energie-Lösung?

Wir helfen Ihnen dabei, die ideale Konfiguration zu finden. Kontaktieren Sie uns noch heute für kompetente, individuelle Unterstützung.