From full charge to zero volts – REGATRON’s custom solution for battery end-of-life and recycling applications! Discover more about safe solutions for the disposal and recycling of used high-voltage batteries and storage systems!

REGATRON AC power supply units now offer a refined power gradation by connecting 30 kVA and 50 kVA power units in parallel in any configuration. Find out more in this article!

Your report straight from the research! With friendly approval by HyCentA Research GmbH / Austria

REGATRON delivers a 2 MVA full programmable AC System to CENTRO IBERICO DE INVESTIGACION CIIAE / Spain: Scalability and Versability for advanced Energy Research!

Discover REGATRON’s latest advancements in Power Hardware-in-the-Loop (P-HIL) and EMC compliance testing!

With the new G5.IND power supply series, REGATRON is launching a lower-cost variant for everyday use in the industrial sector. G5.IND stands for a well-balanced functionality, challenging specifications and the REGATRON quality.

Do your engineers need a mobile power supply for use at various locations? Do you want to avoid the hassle of complex mains cabling and still benefit from the advantages of a modular power system? Do you want your power source to be adapted to different requirements “at the click of a finger”? Then take a close look at the new Standardized G5 System Solutions from REGATRON!

REGATRON has added another dimension to its regenerative AC power supply units TC.ACS: In AC load mode, the shape of the load current can now be programmed both in terms of waveform and phase angle! This opens further areas of application, some of them highly complex, in the field of system and plant testing as well as in the safety verification sector.

On National Future Day 2024, REGATRON once again opened the doors to young talents and welcomed 15 inquisitive girls and boys for an exciting insight into working life. The day offered a practical introduction to the many different areas at REGATRON.

Modern storage technologies, intelligent electrical grids and electromobility have experienced an unprecedented spread in recent years. More and more so-called P-HIL setups are being used to test and optimize such systems: A virtual model controls the power elements such as vehicle converters, grid inverters or DC power elements in their real position within the system, while the output variables are fed back into the model to form a closed loop system.

Also this year, REGATRON took part in the beach volleyball fun tournaments in Rorschach with two teams of four.

Two of our apprentices completed their apprenticeship at REGATRON this summer.

High modularity and a well-considered product portfolio enable the realization of complex and highly efficient test solutions for development and test tasks of high-energy components and systems.

Several megawatts of e-power with compact programmable power supplies – unthinkable just a few years ago – but already state of the art today! Rapid advances in power electronics and battery technology is making it possible for electric energy to move into areas of application that were traditionally reserved for fossil fuels due to their high power levels.

With the increasing decentralized operation of public power grids, it is no longer just the performance criteria of the grid that are of great importance. Rather, due to the growing number of active grid participants such as solar plants, wind power plants and charging stations, the dynamic properties like the grid impedance and the characteristic time response of the AC grid are becoming more and more important.

Even in the field of technology, the ‘straight path’ is not necessarily the best solution. Careful planning, decades of experience in a wide range of applications and solid engineering work make REGATRON power supplies reliable, versatile and robust components, even for complex and unusual applications – made for the extraordinary!

A further step ahead for the successful REGATRON G5 DC Power Supply family: The new G5.SCPI interface takes account of today’s complex requirements of test benches and automation platforms.

The regenerative AC power supplies TC.ACS from REGATRON have established a firm place on the world market due to their versatile application possibilities both as programmable grid simulators and as powerful AC loads. Outstanding features are above all the impressively wide-ranging programmability, the modular system design, the robustness of the devices and the intuitive operation of the operating, service and analysis software ACSControl.

High-Power supplies for your test and laboratory applications are expensive investments that will meet your needs for years to come. But who can predict which direction technical developments will take? Will there be an unexpected demand for more voltage with less amperage? Or the other way around?

Thermal energy and in particular process heat have increasingly become an important topic of discussion with regard to global warming. Concepts for energy recovery and waste heat utilisation can make a significant contribution to today’s energy situation – a clear reason for REGATRON to consider the utilisation of waste heat from DC power supplies in the G5 family!

Consistent ongoing development of existing products is an important credo of REGATRON. The wide range of applications of the well proven REGATRON TC.ACS grid simulator series was able to be extended with specialised additional systems and functions for use in the field of EMC testing (electromagnetic compatibility).

The range of applications for the regenerative TC.ACS series continues to grow. The new Power Mode simplifies the simulation of AC load circuitry and enables load tests of generators, AC charging stations for electric vehicles and power units in the aviation sector.

REGATRON values social and environmental criteria by adhering to global standards, promoting diversity, and implementing environmentally friendly practices.

To meet the increasing requirements on interfaces and communication protocols for the seamless integration of test benches and automation systems, REGATRON has developed the new G5.ECAT interface.

The new High Impedance Mode allows the simulation of phase failures and short-term mains interruptions. Other features have been optimized. Learn more in this article.

Bidirectional, source, or sink – regenerative – highly dynamic and highly accurate – parallel, series, and matrix operation – highest current and power density

REGATRON’s Grid Simulators offer significant advantages when testing chargers up to 22 kW. Now, double the rated current is available in single-phase operation. Learn more in this article.

REGATRON’s powertrain test solutions come ready to use and help the engineer save a lot of time.

Testing products with different country-specific mains voltages: A REGATRON turnkey solution that brings great efficiency benefits to the customer. Learn more.

G5.RCU is successfully used when the power supply and the user’s location are physically separated. Possible reasons for this are: Required separation from the power supply or monitoring/operation of the power supply from next to the DUT.

REGATRON’s smart solution for testing both battery modules and packs saves cost thanks to its wide test capabilities and application-specific, ready-to-use features.